Re: Install problem HP integrity rx2660(Montecito)

[Rick Jones <rick_(_dot_)_jones2_(_at_)_hp_(_dot_)_com>]

Richard Walter wrote:
> Hello,
>
> I have attached my console at the serial port at the backside of the 
> machine (console IOIOIO). There is an auxiliary serial port too and a 
> vga port.
>
> Where can i look for the vendor or divice ID, i have attached some outputs:

At the risk of putting words into Marcel's mouth I would guess here. 
Notice the vendor and device id columns.  Of course I'm nto 100% certain 
that is showing the uarts :)

>    Seg  Bus  Dev  Fnc  Vendor  Device Slot
>     #    #    #    #     ID      ID     #   Path
>    ---  ---  ---  ---  ------  ------  ---  -----------
>     00   00   01   00  0x103C  0x1303   XX  
> Acpi(HWP0002,PNP0A03,0)/Pci(1|0)
>     00   00   01   01  0x103C  0x1302   XX  
> Acpi(HWP0002,PNP0A03,0)/Pci(1|1)
>     00   00   01   02  0x103C  0x1048   XX  
> Acpi(HWP0002,PNP0A03,0)/Pci(1|2)
>     00   00   02   00  0x1033  0x0035   XX  
> Acpi(HWP0002,PNP0A03,0)/Pci(2|0)
>     00   00   02   01  0x1033  0x0035   XX  
> Acpi(HWP0002,PNP0A03,0)/Pci(2|1)
>     00   00   02   02  0x1033  0x00E0   XX  
> Acpi(HWP0002,PNP0A03,0)/Pci(2|2)
>     00   00   03   00  0x1002  0x515E   XX  
> Acpi(HWP0002,PNP0A03,0)/Pci(3|0)
>     00   01   01   00  0x1000  0x0054   XX  
> Acpi(HWP0002,PNP0A03,200)/Pci(1|0)
>     00   01   02   00  0x14E4  0x1648   XX  
> Acpi(HWP0002,PNP0A03,200)/Pci(2|0)
>     00   01   02   01  0x14E4  0x1648   XX  
> Acpi(HWP0002,PNP0A03,200)/Pci(2|1)

If it helps, I can product some lspci output from an rx2660 running "Linux"

rick jones
_______________________________________________
freebsd-ia64_(_at_)_freebsd_(_dot_)_org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ia64
To unsubscribe, send any mail to "freebsd-ia64-unsubscribe_(_at_)_freebsd_(_dot_)_org"